Embedded Firmware Engineer - Humanoid (human)
NEURA Robotics · Zurich · Posted Nov 17, 2026
Transparency
FreshOnline for 3 days and never reposted. Early applicants get the most attention, so now is the time to apply.
- First seen
- Nov 18, 2026
- Offered for
- 3 days
Overview
- Category
- Hardware
- Employment type
- Permanent
- Workplace type
- On-site
- Country
- Switzerland
- Seniority
- Senior
- Schedule
- Full time
From the posting
Your mission & challenges
Our system runs high-density sensing and actuation at 1 kHz. Your firmware will keep the system stable, safe, and responsive. You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack. You will work closely with electronics, mechatronics, and controls engineers to turn the architecture into a robust, testable embedded system.
Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz.
Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller:
Motor network supervision (CAN-FD/SPI/RS485).
Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays.
Safety monitoring, watchdogs, and power-loss handling.
Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller.
Implement calibration procedures, configuration management, and firmware update mechanisms.
Design and run unit/integration tests for control and safety logic; support HIL / bench testing.
Work tightly with controls/AI engineers on interfaces, timing budgets, and observability.
What we can look forward to
4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial).
Fluency in C / C++ for microcontrollers and RTOS environments (FreeRTOS or similar).
Practical experience with BLDC motor control, FOC, and real-time control loops.
Experience with one or more of: CAN-FD, SPI, RS485, Ethernet in real-time systems.
Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary.
Strong focus on safety, reliability, and deterministic behaviour.
Experience with ARM Cortex-M7/M85 platforms and dual-core debugging.
micro-ROS / ROS 2 integration experience.Prior work on servo drives or complex articulated robotic systems.
Familiarity with control theory (impedance control, observers, state estimation).
